Sepsis is defined as a clinical syndrome in which patients have an infection that is accompanied by an extreme systemic response. Sepsis of sufficient severity that the function of major organ systems in the body (such as heart, kidney, brain, and others) is impaired is referred to as “severe sepsis.” Patients with severe sepsis that have continued organ system impairment and/or low blood pressure that does not respond to treatment with adequate fluid replacement are considered to be in “septic shock.” The combination of early detection of sepsis coupled with timely, appropriate interventions can significantly improve the chances of survival for patients with all types of sepsis.

The datasets contain hospital-level treatment measures and hospital-level risk-adjusted mortality rates for adult patients, with a diagnosis of severe sepsis or septic shock seen at New York State Article 28 (acute care) facilities and reported to the New York State Department of Health in 2015 and 2016.

The treatment measures and risk adjusted mortality rates are presented by hospital. Only hospital level measure data for which there were at least ten cases in the denominator is reported. Statewide measures are calculated using all hospitals, regardless of the number of sepsis cases treated.

The datasets contain hospital discharges counts (numerators, denominators, volume counts), observed, expected and risk-adjusted rates with corresponding 95% confidence intervals for IQIs generated using methodology developed by Agency for Healthcare Research and Quality (AHRQ).
The IQIs are a set of measures that provide a perspective on hospital quality of care using hospital administrative data. These indicators reflect quality of care inside hospitals and include inpatient mortality for certain procedures and medical conditions; utilization of procedures for which there are questions of overuse, underuse, and misuse; and volume of procedures for which there is some evidence that a higher volume of procedures is associated with lower mortality.
All the IQI measures were calculated using Statewide Planning and Research Cooperative System (SPARCS) inpatient data beginning 2009. US Census data files provided by AHRQ were used to derive denominators for county level (area level) IQI measures.
The mortality, volume and utilization measures IQIs are presented by hospital as rates or counts. Area-level utilization measures are presented by county as rates.

The Individual Provider Network Data displays information on individuals participating in health plan networks from January through March, 2019. Plan network data is collected from Medicaid, Commercial, and Exchange plans on a quarterly basis by the Department of Health, including managed care plans, as well as PPO/EPO plans.
For more information, please visit: https://pndslookup.health.ny.gov.

The datasets contain hospital discharges counts (numerators, denominators, volume counts), observed, expected and risk-adjusted rates with corresponding 95% confidence intervals for IQIs generated using methodology developed by Agency for Healthcare Research and Quality (AHRQ).
The IQIs are a set of measures that provide a perspective on hospital quality of care using hospital administrative data. These indicators reflect quality of care inside hospitals and include inpatient mortality for certain procedures and medical conditions; utilization of procedures for which there are questions of overuse, underuse, and misuse; and volume of procedures for which there is some evidence that a higher volume of procedures is associated with lower mortality.
All the IQI measures were calculated using Statewide Planning and Research Cooperative System (SPARCS) inpatient data beginning 2009. US Census data files provided by AHRQ were used to derive denominators for county level (area level) IQI measures.

The mortality, volume and utilization measures IQIs are presented by hospital as rates or counts. Area-level utilization measures are presented by county as rates.

The institutional Provider Network Data displays information on health facilities and ancillary service providers (for example: hospitals, labs, home care agencies) participating in health plan networks from July through September, 2018. Plan network data is collected from Medicaid, Commercial, and Exchange plans on a quarterly basis by the Department of Health, including managed care plans, as well as PPO/EPO plans.

The datasets contain hospital discharges counts (numerators, denominators, volume counts), observed, expected and risk-adjusted rates with corresponding 95% confidence intervals for Patient Safety Indicators generated using methodology developed by Agency for Healthcare Research and Quality (AHRQ).

The PSIs are a set of indicators providing information on potential in hospital complications and adverse events following surgeries, procedures, and childbirth. The PSIs were developed by AHRQ after a comprehensive literature review, analysis of ICD-9-CM codes, review by a clinician panel, implementation of risk adjustment, and empirical analyses.

All PSI measures were calculated using Statewide Planning and Research Cooperative System (SPARCS) inpatient data beginning 2009. US Census data files provided by AHRQ were used to derive denominators for county level (area level) PSI measures.

The mortality, volume and utilization measures PSIs are presented by hospital as rates or counts. Area-level measures are presented by county as rates.

This is one of two datasets that contain observed and expected rates for Agency for Healthcare Research and Quality Prevention Quality Indicators – Adult (AHRQ PQI) for calendar year 2015. This dataset is at the zip code level. The Agency for Healthcare Research and Quality (AHRQ) Prevention Quality Indicators (PQIs) are a set of population based measures that can be used with hospital inpatient discharge data to identify ambulatory care sensitive conditions. These are conditions where 1) the need for hospitalization is potentially preventable with appropriate outpatient care, or 2) conditions that could be less severe if treated early and appropriately. All PQIs apply only to adult populations (over the age of 18 years). The rates were calculated using Statewide Planning and Research Cooperative System (SPARCS) inpatient data and Claritas population information.
The observed rates and expected rates for each AHRQ PQI is presented by either resident county (including a statewide total) or resident zip code (including a statewide total).

Sepsis is defined as a clinical syndrome in which patients have an infection that is accompanied by an extreme systemic response. Sepsis of sufficient severity that the function of major organ systems in the body (such as heart, kidney, brain, and others) is impaired is referred to as “severe sepsis.” Patients with severe sepsis that have continued organ system impairment and/or low blood pressure that does not respond to treatment with adequate fluid replacement are considered to be in “septic shock.” The combination of early detection of sepsis coupled with timely, appropriate interventions can significantly improve the chances of survival for patients with all types of sepsis.

The datasets contain hospital-level treatment measures for pediatric (age

The datasets contain hospital discharges counts (numerators, denominators, volume counts), observed, expected and risk-adjusted rates with corresponding 95% confidence intervals for Patient Safety Indicators generated using methodology developed by Agency for Healthcare Research and Quality (AHRQ).

The PSIs are a set of indicators providing information on potential in hospital complications and adverse events following surgeries, procedures, and childbirth. The PSIs were developed by AHRQ after a comprehensive literature review, analysis of ICD-9-CM codes, review by a clinician panel, implementation of risk adjustment, and empirical analyses.

All PSI measures were calculated using Statewide Planning and Research Cooperative System (SPARCS) inpatient data beginning 2009. US Census data files provided by AHRQ were used to derive denominators for county level (area level) PSI measures.

The mortality, volume and utilization measures PSIs are presented by hospital as rates or counts. Area-level measures are presented by county as rates.

This dataset contains the list of registered facilities that own, operate, or sell x-ray producing equipment in New York State, including: mailing address, radiation safety officer, contact information, and description of facilities. Excluding businesses that use x-ray producing equipment in a commercial application, businesses located in New York City are not represented by these data. For more information, visit https://www.health.ny.gov/radiation.

The datasets contain hospital discharges counts (numerators, denominators, volume counts), observed, expected and risk-adjusted rates with corresponding 95% confidence intervals for Patient Safety Indicators generated using methodology developed by Agency for Healthcare Research and Quality (AHRQ).

The PSIs are a set of indicators providing information on potential in hospital complications and adverse events following surgeries, procedures, and childbirth. The PSIs were developed by AHRQ after a comprehensive literature review, analysis of ICD-9-CM codes, review by a clinician panel, implementation of risk adjustment, and empirical analyses.

All PSI measures were calculated using Statewide Planning and Research Cooperative System (SPARCS) inpatient data beginning 2009. US Census data files provided by AHRQ were used to derive denominators for county level (area level) PSI measures.

The mortality, volume and utilization measures PSIs are presented by hospital as rates or counts. Area-level measures are presented by county as rates.

The Individual Provider Network Data displays information on individuals participating in health plan networks from April through June, 2019. Plan network data is collected from Medicaid, Commercial, and Exchange plans on a quarterly basis by the Department of Health, including managed care plans, as well as PPO/EPO plans.
For more information, please visit: https://pndslookup.health.ny.gov.

This dataset represents hospital-reported data for all adult patients with a diagnosis of severe sepsis or septic shock seen at New York State Article 28 (acute care) facilities and reported to the New York State Department of Health. Quality measures are calculated using this data for reporting hospital-specific rates and trends. The Adult New York State sepsis process of care measures were developed using a National Quality Forum (NQF) measure for guidance: NQF #500 Severe Sepsis and Septic Shock: Management Bundle. These measures, reported as statewide and hospital-specific rates, reflect several key processes of care that can increase the probability of surviving an episode of sepsis. There is one important outcome measure, mortality, included in this dataset for which statewide mortality rates and hospital-specific risk adjusted mortality rates are reported.

The Institutional Provider Network Data displays information on health facilities and ancillary service providers (for example: hospitals, labs, home care agencies) participating in health plan networks from January through March, 2019. Plan network data is collected from Medicaid, Commercial, and Exchange plans on a quarterly basis by the Department of Health, including managed care plans, as well as PPO/EPO plans. For more information, please visit: https://pndslookup.health.ny.gov.

The Institutional Provider Network Data displays information on health facilities and ancillary service providers (for example: hospitals, labs, home care agencies) participating in health plan networks from April through June, 2019. Plan network data is collected from Medicaid, Commercial, and Exchange plans on a quarterly basis by the Department of Health, including managed care plans, as well as PPO/EPO plans. For more information, please visit: https://pndslookup.health.ny.gov.

This dataset contains the list of facilities that hold radioactive material licenses in New York State, including: mailing address, radiation safety officer, and contact information. Excluding businesses that use radioactive materials in a commercial application, businesses located in New York City are not represented by these data. For more information, visit https://www.health.ny.gov/radiation.

The Statewide Planning and Research Cooperative System (SPARCS) Inpatient De-identified File contains discharge level detail on patient characteristics, diagnoses, treatments, services, and charges. This data file contains basic record level detail for the discharge. The de-identified data file does not contain data that is protected health information (PHI) under HIPAA. The health information is not individually identifiable; all data elements considered identifiable have been redacted. For example, the direct identifiers regarding a date have the day and month portion of the date removed.

This dataset represents hospital-reported data for all pediatric patients with a diagnosis of severe sepsis or septic shock seen at New York State Article 28 (acute care) facilities and reported to the New York State Department of Health. Quality measures are calculated using this data for reporting hospital- specific rates and trends. These measures, reported as statewide and hospital-specific rates, reflect several key processes of care that can increase the probability of surviving an episode of sepsis.